optoway spm-6100wg ********************************************************************************************************************************************************************* ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 1 spm-6100wg / spm-6100bwg / SPM-6100AWG (rohs compliant) 16g fc / 850 nm digital diagnostic lc multi-mode sfp+ transceiver ******************************************************************************************************************************************************************** features l up to 14.025 gb/s bi-directional data link l complaint to sfp+ msa l compliant with 16g fc 1600-sn l compliant with 8g, 4g fibre channel l compliant with 10g fibre channel l built-in cdr with shut-off control l link distance at 14.025 gbd 35 m links with 50/125 m m mmf cables 100 m links with om3 mmf cables 125 m links with om4 mmf cables l sff-8472 digital diagnostic function l single +3.3 v power supply l rohs 6/6 compliant l 0 to 70 o c operation: spm-6100wg l -5 to 85 o c operation: spm-6100bwg l -40 to 85 o c operation: SPM-6100AWG l class 1 laser international safety standard iec 60825 compliant l enhanced ewrap, owrap operational features applications l multi-rate 16x/8x/4x fiber channel l 10g fcoe description the spm-6100wg series multi-mode transceivers is sfp+ module for bi-directional serial optical data communications such as 16x/8x/4x fibre channel. it is with the sfp+ 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. this module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. the transmitter section uses a vertical cavity surface emitted laser (vcsel) and is a class 1 laser compliant according to international safety standard iec 60825. the receiver section uses an integrated gaas detector preamplifier (idp) mounted in an optical header and a rate selection clock data recovery (cdr) ic. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec 60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) fc distance (m) wavelength (nm) package temp. ( o c) rohs compliant spm-6100wg 14.025 16g / 8g / 4g 35/100/125 * 850 vcsel sfp+ with dmi 0 to 70 yes spm-6100bwg 14.025 16g / 8g / 4g 35/100/125 * 850 vcsel sfp+ with dmi -5 to 85 yes SPM-6100AWG 14.025 16g / 8g / 4g 35/100/125 * 850 vcsel sfp+ with dmi -40 to 85 yes * : 35m for om2 mmf , 100m for om3 mmf and 125 m for om4 mmf. all tested at 14.025 gb/s.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 2 absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c 0 70 spm-6100wg -5 85 spm-6100bwg operating case temperature topr -40 85 o c SPM-6100AWG operating relative humidity rh 0 85 % non condensing power supply voltage vcc 0 4 v recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.14 3.3 3.46 v 0 70 o c / spm-6100wg -5 85 o c / spm-6100bwg operating case temperature topr -40 85 o c / SPM-6100AWG power supply current i cc (tx+rx) 290 ma / 1 data rate 4.25 14.025 gb/s 1. with established link. transmitter optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes average launch power po, avg -7.8 dbm 1 / average output center wavelength l c 840 850 860 nm output spectrum width l 0.59 nm rms ( ) optical modulation amplitude @4.25 gb/s oma 247 m w optical modulation amplitude @8.5 gb/s oma 302 m w optical modulation amplitude @14.025 gb/s oma 331 m w vertical eye closure penalty @14.025 gb/s cevpq 2.56 db relative intensity noise rin -128 db/hz 1. max po: class 1 laser safety limit per cdrh and iec/en 60825. output power is power coupled into a 50/125 m m multi-mode fiber. receiver optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes receiver oma sensitivity @4.25 gb/s rxsens 61 m w 2 receiver oma sensitivity @8.5 gb/s rxsens 76 m w 2 receiver oma sensitivity @14.025 gb/s rxsens 89 m w 2 stress receiver oma sensitivity @14.025 gb/s sens --- -7.7 dbm 2 receiver overload p max 0 --- dbm los -- deasserted los d --- --- -13 dbm transition: low to high los -- asserted los a -24 --- --- dbm transition: high to low wavelength of operation l c 770 860 nm optical return loss orl -12 db 2. measured with worst er; ber < 10 -12 and prbs 2 31 -1.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 3 electrical characteristics parameter symbol min typ max units notes high-speed signal (cml) interface specification input data rate 4.25 14.025 gb/s differential input impedance rin 100 differential data input amplitude 150 700 mvpp internally ac coupled output data rate 4.25 14.025 gb/s differential output impedance rout 100 differential data output amplitude 350 600 700 mvpp internally ac coupled low-speed signal (lvttl) interface specification input high voltage 2.0 vcc+0.3 v input low voltage gnd 0.8 v output high voltage 2.4 vcc v output low voltage gnd 0.5 v link length parameter symbol min typ max units note fiber length on 50/125 m m mmf l 150 50 35 m 1 2 3 fiber length on 50/125 m m high-bandwidth (om3) mmf l 380 150 100 m 1 2 3 note: 1. at 4.25 gb/s fibre channel data rate. 2. at 8.5 gb/s fibre channel data rate. 3. at 14.025 gb/s fibre channel data rate.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 4 connection diagram pin signal name description pin signal name description 1 v ee t transmitter signal ground 11 v ee r receiver signal ground 2 tx_fault transmitter fault indication. logic 1 output = laser fault. logic 0 output = normal operation 12 rd- inverse receiver data out 3 tx_disable logic 1 input (or no connection) = tx off, logic 0 = tx on. 13 rd+ receiver data out 4 sda modulation definition 2 C two wires serial id interface 14 v ee r receiver signal ground 5 sdl modulation definition 1 C two wires serial id interface 15 v cc r receiver power C 3.3v 5% 6 mod-abs modulation absent, connected to v ee t or v ee r in the module. 16 v cc t transmitter power C 3.3v 5% 7 rs0 rx rate select: this pin has an internal 30k pull down to ground. a signal on this pin will not affect module performance. 17 v ee t transmitter signal ground 8 rx_los loss of signal out (oc). 18 td+ transmitter data in 9 rs1 tx rate select. this pin has an internal 30k pulldown to ground. a signal on this pin will not affect module performance. 19 td- inverse transmitter data in 10 v ee r receiver signal ground 20 v ee t transmitter signal ground module definition module definition pin 4 pin 5 pin 6 interpretation by host 4 sda scl mod-abs serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, sda and sdl appear as no connector (nc) and mod-abs is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 5 recommended circuit schematic 0.1 f 22 f 0.1 f 22 f vee r post amp ld driver z=50 z=50 z=50 z=50 vee t 4 .7 h 4 .7 h td - td + vcc t vcc r rd - rd + 100 sfp+ module serdes 100 los rd - rd + td - td + 0.1 f protocol eeprom module detect scl sda loss of singal tx_disable tx_fault mod_abs scl sda 10 k 10 k 10 k 10 k tx_fault tx_disable (1,17,20) 3 2 18 19 16 15 12 13 8 (10,11,14) 6 5 4 10 k vcc 3.3v vcc 3.3v ic ic depending on serdes 0.1 f 30k 30k rs1 rs0 7 9 tx rate select rx rate select package diagram units in mm note: specifications subject to change without notice.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 6 wrap operation functions - soft control (address a2h, byte 111). to assist with local host or remote diagnostic and optimization sequences, electrical and optical wrap functions can be enabled. optical wrap (owrap) takes the received optical signal through cdrs and retransmits it optically out. electrical wrap (ewrap) takes the received electrical signal through cdrs and retransmits it electrically out. optional forward functions can be transmitted outbound the wrapped information via i2c control. byte bit name description 4-7 reserved reserved. 3 owrap forward enable bit when set in combination with owrap enable, owrap forward routes incoming sfp+ rx optical data to both the tx optical output and the rx electrical output. enabling sets bit 2 and clears all other bits in byte 111. 2 owrap enable bit when set, owrap routes incoming sfp+ rx optical data to the tx optical output. enabling clears all other bits in byte 111. 1 ewrap forward enable bit when set in combination with ewrap enable, ewrap forward routes incoming sfp+ tx electrical data to both rx electrical output and tx optical output. enabling sets bit 0 and clears all other bits in byte 111. 111 0 ewrap enable bit when set, ewrap enable routes incoming sfp+ tx electrical data to the rx electrical output. enabling clears all other bits in byte 111. owrap forward enable mode (i2c controlled) owrap enable mode (i2c controlled) sfp+ connector sfp+ connector
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 7 ewrap forward enable mode (i2c controlled) ewrap enable mode (i2c controlled) sfp+ connector sfp+ connector
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 8 eeprom series id memory contents (address a0h) addr. hex ascii note addr. hex ascii note addr. hex ascii note addr. hex ascii note 0 03 sfp+ 32 20 64 00 96 00 1 04 33 20 65 1a uncooled tx, txdis, txfault, los enable 97 00 2 07 lc 34 20 66 00 up bit rate 98 00 3 10 10g base-sr 35 20 67 00 low bit rate 99 00 4 00 36 00 na 68 100 00 5 00 37 00 69 101 00 6 00 38 0e 70 102 00 7 60 short (s) and intermediate (i) distance 39 fa vendor ieee oui 71 103 00 8 40 shortwave laser w/o ofc (sn) 40 53 s 72 104 00 9 0c multimode (m6, m5, m5e) 41 50 p 73 105 00 10 f0 1600/1200/ 800/400 mbytes/sec 42 4d m 74 106 00 11 06 64b/66b 43 2d - 75 107 00 12 8c 14.025gbps 44 36 6 76 108 00 13 00 45 31 1 77 109 00 14 00 46 30 0 78 110 00 15 00 47 30 0 79 111 00 16 04 om2 50/125um mmf , 35m 48 57 w 80 112 00 17 02 om1 62.5/125um mmf, 15m 49 47 g 81 113 00 18 00 50 20 82 114 00 19 0a om3 50/125um mmf, 100m 51 20 83 serial number: each piece with different serial number 115 00 20 4f o 52 20 84 116 00 21 50 p 53 20 85 117 00 22 54 t 54 20 86 118 00 23 4f o 55 20 part number 87 119 00 24 57 w 56 30 0 88 120 00 25 41 a 57 30 0 89 121 00 26 59 y 58 30 0 90 122 00 27 20 59 31 1 revision, depended on version 91 date code 123 00 28 20 60 03 92 68 monitoring 124 00 29 20 61 52 850 nm 93 f0 soft control and monitoring 125 00 30 20 62 00 reserved 94 05 sff-8472v11.0 126 00 31 20 vendor name 63 checksum 0-62 95 checksum 64-94 127 00 vendor specific eeprom
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 9 eeprom series id memory contents (address a2h) addr. hex note addr. hex note addr. hex note addr. hex note 0 4b 32 31 64 00 for external cal. 96 real time temp. msb 1 00 temp. high alarm (75 o c) 33 2d rx power high alarm (1dbm) 65 00 for external cal. 97 real time temp. lsb 2 fb 34 02 66 00 for external cal. 98 real time vcc msb 3 00 temp. low alarm(-5 o c) 35 32 rx power low alarm (-12.5dbm) 67 00 for external cal. 99 real time vcc lsb 4 49 36 27 68 3f for external cal. 100 real time tx bias msb 5 00 temp. high warming(73 o c) 37 10 rx power high warming (0dbm) 69 80 for external cal. 101 real time tx bias lsb 6 00 38 03 70 00 for external cal. 102 real time tx pwr msb 7 00 temp. low warming (0 o c) 39 7b rx power low warming(-10.5dbm) 71 00 for external cal. 103 real time tx pwr lsb 8 8c 40 00 reserved 72 00 for external cal. 104 real time rx pwr msb 9 a0 voltage high alarm (3.6v) 41 00 reserved 73 00 for external cal. 105 real time rx pwr lsb 10 75 42 00 reserved 74 00 for external cal. 106 reserved 11 30 voltage low alarm(3.0v) 43 00 reserved 75 00 for external cal. 107 reserved 12 88 44 00 reserved 76 01 for external cal. 108 reserved 13 b8 voltage high warming(3.5v) 45 00 reserved 77 00 for external cal. 109 reserved 14 79 46 00 reserved 78 00 for external cal. 110 tx dis, tx fault, rx los 15 18 voltage low warming (3.1v) 47 00 reserved 79 00 for external cal. 111 owrap, ewrap 16 27 48 00 reserved 80 01 for external cal. 112 alarm flag 17 10 tx bias high alarm(20ma) 49 00 reserved 81 00 for external cal. 113 alarm flag/reserved 18 01 50 00 reserved 82 00 for external cal. 114 reserved 19 f4 tx biaslow alarm(1ma) 51 00 reserved 83 00 for external cal. 115 reserved 20 1d 52 00 reserved 84 01 for external cal. 116 warming flag 21 4c tx bias high warming (15ma) 53 00 reserved 85 00 for external cal. 117 warming flag/reserved 22 03 54 00 reserved 86 00 for external cal. 118 reserved 23 e8 tx bias low warming (2ma) 55 00 reserved 87 00 for external cal. 119 reserved 24 27 56 00 for external cal. 88 01 for external cal. 120 25 10 tx power high alarm (0dbm) 57 00 for external cal. 89 00 for external cal. 121 26 05 58 00 for external cal. 90 00 for external cal. 122 27 26 tx power low alarm(-8.8dbm) 59 00 for external cal. 91 00 for external cal. 123 28 1f 60 00 for external cal. 92 00 for external cal. 124 29 07 tx power high warming(-1dbm) 61 00 for external cal. 93 00 for external cal. 125 30 06 62 00 for external cal. 94 00 for external cal. 126 31 7c tx power low warming (-7.8dbm) 63 00 for external cal. 95 check sum 127 vendor specific note: address 128 C 247: customer r/w eeprom. address 248 C 255: vendor specific. note: specifications subject to change without notice.
optoway spm-6100wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************* optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/12/1 v2.0 10 revision history version subject release date 1.0 initial datasheet 2011/7/1 2.0 add auto rate selection for transmitter and receiver 2011/12/1
|
